FD 80 B-F / FD 80 B-Q
Diesel generators 85.0 kVA - 271.0 kVA
Ask about this generator

Features of the unit
Engine | Baudouin 4M10G4D0/S |
Emission standard | fuel optimized |
Fuel system | direct injection |
Speed control | electronic |
Frequency | 50Hz |
ESP maximum power | 85 kVA / 68 kW |
PRP rated power | 78 kVA / 62 kW |
Fuel tank | 260 L |
Alternator | Linz PRO22S B/4 |
Performance class | G3 (wg ISO 8528-5) |
Characteristics
- Digital voltage regulation +/- 0,25 %
- One phase voltage control
- Low disturbance level THD <2.5%
- Alternator short circuit capacity 250% In (optionally 300%)
- Class H insulation
- Compact design
- Performance class G3 (according to ISO 8528-5)
- Ready to load just after start
- AMF and MRS functionality and protection
- Autonomy 17,3 h with 75% load
- Protection index IP23
- Forklift manouvable from the front and side wall
Unit Specification Sheets
Selected advantages
of Q-Series Canopies
Lista usług
-
Large Fuel TanksElement listy 1
Equipped with spacious fuel tanks, ensuring extended operation without frequent refueling.
-
Two Fuel InletsElement listy 2
One of the inlets can be extended outside, providing added convenience for refueling.
-
Retention TrayElement listy 3
An integrated retention tray prevents fuel or oil leaks, ensuring environmental protection.
-
Easy Service AccessElement listy 4
Ergonomic design allows for easy access from all sides, simplifying maintenance and inspections.
-
Additional Sockets and Protections
In power ranges from 20 to 250 kVA, the canopies allow for the installation of additional sockets and protections.
-
Optional Dust Filters
The air intake can be optionally protected with dust filters, enhancing durability and performance.
-
Anchoring Points
Four anchoring points ensure stability by securing the unit to the ground during operation.
-
UV Protection for Controller
Integrated retention tray prevents leaks, ensuring compliance with environmental regulations.
-
Corrosion-Resistant Screw Covers
Screws are protected with anti-corrosion covers, increasing the durability of the canopy.

ComAp driver
InteliLite AMF 25

Controller type: ComAp InteliLite AMF 25 |
Support of Dual AMF/MRS applications |
Direct communication with EFI engines |
Total remote monitoring and control |
Intuitive operator interface, adjustable Main Screen |
Real time clock |
Comprehensive history log with up to 350 events |
3 phase true RMS current and voltage measurement |
Both mains and generator voltage detection |
Active/Reactive Power and Power Factor per phase measurement |
Run Hours counter with source selector |
3 maintenance timers (counting even under zero) |
Multipurpose flexible timers (also for rental) |
Battery voltage measurement |
Complete engine and alternator protection |
CAN modules support |
USB port on-board |
2 slots for plug-in modules |
Plug-in module concept for more capabilities (RS232, RS485, Ethernet, GPRS, 4G/LTE, Modbus, SNMP, emails, SMS, I/Os) |
Cloud-based monitoring and control via WebSupervisor) (optional module required) |
Geofencing and tracking via WebSupervisor (optional module required) |
Control and monitoring over SMS (GSM module required) |
3 levels of password protection |
In-built PLC, complemented with a monitoring/debugging tool, for additional functionality, if required |
Spare inputs and outputs available by default: binary input – 2, binary output – 1, analogue input – 3 |
A version for low temperature is also available |
Baudouin engine
4M10G4D0/S
Manufacturer | Baudouin |
Type | 4M10G4D0/S |
Made in | China |
Engine power | 69,0 kW |
Emission standard | non-emission |
Rotation per minute | 1500 rpm |
Engine governor | electronic |
Governor class | G3 (wg ISO 8528-5) |
Displacement | 4,1 l |
No of cylinder | 4 |
Fuel system | direct injection |
Electrical system | 12 V |
Cooling system capacity | 18,0 l |
Oil pan capacity | 14,0 l |
Fuel type | Diesel (EN 590) |
Linz alternator
PRO22S B/4
Manufacturer | Linz |
Type | PRO22S B/4 |
Made in | Italy |
Nominal Voltage | 400V |
Nominal power factor (cos φ) | 0,8 |
Ambient temperature, altitude | 40 ºC, 1000m n.p.m. |
Nominal Power | 80.0 kVA |
Protection index | IP 23 |
No of bearing | single bearing |
Coupling | direct |
Technology | brushless |
Short circuit maintaining capacity | 250% 10s |
Efficiency | 90,0 % |
Insulation class | H |
Total harmonic content THD | <2,5 % |
Reactance Xd'' | 10,1 % |
Voltage regulator type | AVR HVR-11 |
Voltage measurement | 3 phases |
Voltage accuracy | +/- 0,25 % |
AVR supply system | Auxiliary winding |